NEW Hayward 1HP In-Ground Swimming Pump Motor Strainer Generic Replacements

Description

NEW Hayward 1HP In-Ground Swimming Pump Motor Strainer Generic Replacements
1HP Hayward Generic In-Ground Swimming Pools Pumps Motors Strainer Replaces
Always pay attention before use！！！
1.Before use, please adjust to the corresponding voltage for home use, and then fill the water pump with water before using it, otherwise the motor will be damaged.
2.When adjusting the voltage, be sure to adjust after turning off the power. Otherwise the motor will be damaged.
Product description:
1.This swimming pool pump is made with heavy-duty, corrosion-proof construction. The stainless steel motor shaft is constructed with a reinforced thermoplastic body for longer life and durability. Advanced engineering provides high efficiency and minimal noise. This wonderful swimming pool pump will surely keep your above ground and inground pools clean
2.Please connect only to a grounding type receptacle protected by a ground-fault circuit-interrupter (GFCI). To reduce the risk of electric shock, install at least 10 feet from the inside walls of a pool. Do not use an extension cord. This pump is for use with permanently installed pools only-Do not use with storable pools.
Features:
1. Durable Corrosion -Stainless Steel 1.0 HP Shaft, the shaft is constructed with a reinforced thermoplastic body for longer life and durability.The sand filter is made of PPGF30 + PC, 100% drip proof, effective insulation and protection against pool chemicals, heat-resistant double-sized seal for long motor life.
2. POOL PUMP-This self-priming heavy-duty pump delivers outstanding performance and reliability at a fantastic price and costs less than big name brands. The mighty force of this pump makes it efficient and an economical choice.
3. Convenient- Large over-sized filter basket for less frequent maintanence and emptying of debris.It provides the efficient and easy usage, simple installation and operating system that will keep pool water crystal clear and sparkling.
4. UL Certified- This Swimming Pool Pump has a UL Certification to ensure recognized Standards for Safety.
Specifications:
Horsepower: 1HP
Speed: 3450 RPM
Voltage:
120V
Max. Flow: 5555GPH
Max. Temp: 104 Degree Fahrenheit (40 Degree Celsius)
Port Size: 1-1/2"
Power Cord: 58.8"
Package Contents:
1x 1HP Dual voltage Swimming Pool Pump
1x Manual
✨✨
Note:
Our machine does not allow you to disassemble the cable. This product is the highest standard of UL certification. If you wire it yourself, the machine will not work properly. Thank you for your cooperation.
⚡
Precautions for use
Problem Description:
The Pump Pressure is low; The Pump loses Pressure after being energized; Pump is running, But no water coming out.
Causes:
1.The pump head is not filled with water, causing the pump to run without water.
2.During the installation process of the pump, the inlet and outlet pipes are not tightly sealed, and the air leaks inside the pump head. During the operation, the air inside the pump head is pulled in, resulting in insufficient internal pressure, weak pump pressure, no pressure on the pump, no water
Solution:
1. When pumping water, the pump head is filled with water; the pump head transparent cover is tightened; the water pumpinlet and outlet joints are installed, and the raw material belts are tightened when the pipes are installed to prevent air leakage at the joints of the pipes.
2. Before pumping, the pump head should be filled with water.
Inlet and outlet joints wrapped around the raw material tape, beware of leaks.
3.Tightening when installing the inlet and outlet, beware of leaks.
4.The pump head transparent cover is tightened to prevent air leakage and water seepage
Problem Description:
Pump motor trip
Causes:
1. The water pump motor enters water or pump operating environment is excessively humid, and causing the motor to short-circuit and burn.
2. The pump prevents the inlet from entering the water and burns the motor
Problem Description:
There is Water in The Pump
Causes:
Our company carries out a full inspection (pumping) of the water pump, and it might result in some package still leave some water in it, It is normal.
Problem Description:
The Pump stop working suddenly
Causes:
Our company's products are equipped with temperature protection device, when the motor temperature is too high, the temperature protection device will start, It will stop pump working, if the motor is shut down in the normal operation process , generally there is foreign matter inhalation in the pump, resulting in the impeller stuck, motor temperature rise , pump stop working.
Solution:
1. Clean up the waste inside the filter screen of the water pump regularly to prevent the waste foreign matter from flowing into the water pump to jam the impeller.
2. Disassemble the pump body, clean up the foreign matter on the back of the pump body to ensure that there is no foreign matter blocking the impeller, and re-assembly can be reused.
3. The foreign matter of the pump impeller and the diffuser is matched with the foreign matter, causing the impeller to be stuck and cleaning the foreign matter.
☆☆☆As a professional eBay seller, we have five warehouses in the US to make fast delivery! ☆☆☆
🎈
Shipping
：
Orders made before 2:00 PM EST (11:00 AM PST) will be shipped the 72 Hrs. Most orders will be shipped within 72 hrs during weekdays via FedEx, USPS or UPS. We do not ship on weekends or various national holidays.
🎈
Important:
Please make sure your shipping address is correct before we sending your package out shortly. if you want to modify your shipping address after the package is sent out, reshipping cost plus a fee of .5 will apply.
Orders will only ship to PayPal confirmed addresses
If you want to ship to Alaska or Hawaii, please contact us. The shipping fee can be calculated upon request.
🎈
Payment
：
We accept payments only via PayPal.
🎈
Return and Warranty
：
Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. In addition, it allows customers to return new and unused products in their original factory condition for any reason within 30 days from the date of purchase.
Please note that all returns must be pre-approved by seller and have a return merchandise authorization (RMA) number. Unauthorized returns will not be accepted. Buyers are responsible for appropriate packing, returning shipping cost, insurance and returning the item in "new" condition. Returns will be charged 15% restocking fee, if the product does not have quality problems. Used items will not be accepted for return.
For most of our products we offer 3-month warranty, unless stated otherwise. Items that have been misused, abused, damaged or beyond warranty period will not be refunded or exchanged.
🎈
Contact_US:
Welcome to my store☀
If you have any questions, please feel free to email our service specialists 24 Hours a Day, 7 Days a Week.We will reply you ASAP. If no response within 24 Hours, please check the spam in your mail box.
We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
Our aim is to provide Top Level Customer Service, so we will try our best to solve any problem