Hayward Power-Flo LX Above Ground Pool Pumps 1.5 HP

Description

PRODUCT DESCRIPTION
Hayward LX Above Ground Pool Pump Series
The Hayward PowerFlo LX is a high-performance pump series designed for the rigors of aboveground and on-ground type swimming pools. Combining durable, corrosion-proof construction with advanced features and options, it offers dependable performance and quiet operation. The advanced design reduces required maintenance to simple, common-sense procedures. Made of the high-strength PermaGlass XL material this pump has a clear cover to let you see when basket needs cleaning. An extra-large debris basket (118-cubic-inches) keeps pool maintenance to a minimum by extending time between cleanings. Rigid construction with load extender ribbing ensures free-flowing operation for heavy debris loads.
The pump also offers 100-percent drip proof, heat-resistant double-sized seal for long motor life. It features a 1-1/2 inch intake and discharge, and a 6-foot power cord (120-volt). Hayward PowerFlo LX has self-lubricating motor bearings and shaft seals. No lubrication is necessary. The 60-cycle single-phase motor is rated for 1-horsepower (115-volts) and 20-amp circuit breakers. The pump motor is equipped with automatic thermal overload protection. The thermal overload will shut the motor off under abnormal conditions before damage to motor occurs. The motor will auto-restart when safer heat level is reached. For storage and winterizing your pump is important. Pump and motor must be protected from freezing. Shut off all electric power. Disconnect cord/electrical connections and plumbing connections. Drain thoroughly and clean out any debris. Store pump and motor in a dry, well-ventilated room.
Product Specifications:
1½ inch pipe
3 Prong Grounded 6 Foot Cord
Engineered to handle the rigors of above ground swimming pools
Dependable, Energy-Efficient, Quiet
Extra-large debris basket with clear covering
Special Note:
To enhance the pool pump’s performance, the ideal position for the pump is below the water line and close to the pool.
Always install the above ground pool pump in a dry, well-ventilated area; the motors require full air circulation to help with cooling.
Hayward Power-Flo LX Above Ground Pool Pumps do not need lubrication. They are designed with shaft seals and self-lubricating motor bearings.
When following the manufacturer's instructions, worn out shaft seals are easily replaced.
To avoid damage from freezing to pool pumps and motors during the winter months, always store them in a dry, well-ventilated area.
Cord is not twist-lock. Hayward Power-Flo LX Above Ground Pool Pumps do not have an on/off switch.