Fret Doctor Fingerboard Oil 30 ml Fretboard Conditioner (US Only)

Description

Fret Doctor 30 ML Bottle
New Glass Bottle with dropper applicator
Guitar players are sometimes troubled with the problem of micro cracking of their fretboards, which can lead to other problems. Guitar fretboards and inlays are often made from the very same hardwoods that are used in woodwinds like the fife: Rosewood, Granadilla or Blackwood, Boxwood, Cocobolo, and Ebony, just to name a few. Like woodwinds, fretboards are sensitive to the problem of dimensional instability. The fret beds expand as the wood shrinks, stressing the adhesive holding the frets of the instrument, often developing the problem guitarists call "buzz." The wood shrinks on the short axis, causing what is commonly referred to as "fret sprout." The fret isn't growing...the wood is shrinking! The best way to prevent these problems is to maintain the moisture level in the wood at where it was when the instrument was constructed. Just like with woodwinds, mineral oil, silicones, and various other substances don't really penetrate the wood. The wood remains dry inside.
In late 2002, many members of the Les Paul Forum discovered what woodwind players have known for years. Bore Doctor
actually
penetrates
hardwoods, returning the fingerboard to its natural state and making it dimensionally stable. It can minimize the risk of future cracking or splitting. Because of the larger surface area of a fretboard, it was packaged in larger bottles, called Fret Doctor
.
Many thousands of bottles have been sold worldwide ever since, propelled entirely by recommendations from satisfied users.
On the various guitar forums, countless opinions are heard in favor of skin oil, "nose" oil (a variation of skin oil), Linseed oil, Walnut oil, Rose oil, Almond oil, Tung oil, Olive oil, conventional bore oil (most are only mineral oil), baby oil which is really perfumed mineral oil, 3 in 1 oil, salad oil, WD40 (talk about smell), sewing machine oil, Castor oil, gun oil...the list is seemingly endless. It would be far easier to get Dick Cheney to vote Democratic than it would be to change the minds of many of these guitarists.  I heard of another one who uses, would you believe,
fish
oil? There is no limit to the list of substances people will put on their boards! I thought Linseed stunk pretty badly. How about Vinegar and Mayonnaise?  Also, Marvel Mystery Oil. I remember when my Dad would put some in his old Chevy, in both the gas tank and the crankcase. He swore that it increased horsepower. I also heard of someone who (I am not making this up) uses
ear wax
. This story gets pretty disgusting at times.
In order to save me countless emails and arguments, here is my view on the matter:
1. Linseed oil is more like a varnish than an oil. Because it forms a continuous film, it seals the surface of the wood like a varnish, but oils of plant origin may later
slowly
penetrate down to the wood. It can take years. It comes in many forms. The stuff from a hardware or art store is a paint variety, boiled or raw. Both of them stink. If you insist on Linseed oil, get the food grade from a health food store. This grade doesn't smell so bad. After multiple applications,
nothing
can penetrate it. Bear in mind that, if a board is treated with Linseed oil, it will eventually turn black. Linseed oil oxidizes over time, turning black in the process. That is why so many Rosewood boards of the 50s and 60s no longer look like Rosewood.
If you use Linseed oil, take any rags or brushes that are used and dispose of them outdoors. When left in a pile this stuff can spontaneously burst into flame. You then lose both your ax and your home. Squeeze the bottle and screw the cap on tight, minimizing any air space in the container.
2. Tung oil is also a varnish that forms a continuous film. When used for this purpose, a small amount is applied and rubbed with one's hand until the surface feels warm. The heat from friction "sets" (polymerizes) the varnish. This is where the term, "hand rubbed," comes from, not from skin oil. A hand has no lint and leaves no brush marks. A Tung oil finish can sometimes be later penetrated by a light weight plant oil, but it is a
very
slow process. The good news is that, over time, some of the varnish may wear off from finger and string pressure, facilitating better absorption of oil.  Same with Linseed.
3. Shellac is also a varnish, but different from the two above. Linseed and Tung oils are film surfaces. They polymerize and are very difficult to penetrate. Shellac does not form a continuous film, so some oil can get through, at least more easily than Linseed or Tung. I have never heard of it being used on a fretboard, but who knows? It is not advised.
4. Mineral oil merely coats the surface, giving it a bright sheen, but does not penetrate the wood. This oil prevents absorption by a plant oil after the fact. This includes most bore oils, but not all. Read the label.
Most so-called fretboard treatments and bore oils are no more than inexpensive mineral oil with a scent added, like lemon.
5. Silicone-based furniture polishes also make it shiny but prevent later penetration in the short term. Silicone also eventually migrates into the wood, integrating with the cellulose structure and breaking it down.
6. Polyurethane and Nitro finishes can't be penetrated...ever.
7. Skin or Nose oils contain dirt, skin fragments, salt, bacteria and God only knows what else. "Hand-rubbed" does not mean skin oil! It means Tung oil.
8. Petroleum based lubricants behave like mineral oil, don't penetrate the wood, and prevent future absorption. Most contain solvents that can potentially damage some adhesives. If the label says "flammable," that should tell you something.
9. Corn oil, Safflower oil, Olive oil, etc., do penetrate to some degree, but contain no preservatives. They may become rancid over time.
10. Almond oil, Walnut oil, etc., food grade, are probably O.K., but
make sure they don't contain solvents like naphtha or other petroleum distillates.
Solvents can weaken any adhesives used in instrument construction. Be aware that most "Lemon oils" are no more than lemon-scented mineral oil, as are most bore oils.
Real
lemon oil is steam distilled from lemon peel, is quite acidic, with a pH of 3.7 to 4.2. It is an effective cleaner, but wipe it off when you are finished.
11. Rosewood oil comes from an evergreen that grows in the South American highlands. It is consists mostly of an aromatic solvent with a Rosewood oil scent added. The wood comes from a hardwood that grows in the Amazon basin.
Maple fretboards boards often come with an impenetrable finish on them, but some are unfinished. On an unfinished board, Fret Doctor works great. See the bottom of this page.
Bottom Line:
If a fife or a fret board is made from wood that has been properly and slowly air dried (not in a kiln), and most stresses in the wood have been relieved at the time of construction, chances are nothing bad (cracking) will happen to it later on. So, in a sense, we are treating a non-problem here. However, occasionally, a piece will slip through. As it continues to dry, problems lurking inside may develop. Treatment with a penetrating oil of plant origin with preservatives, like Fret Doctor, can prevent this in most cases. The oil replaces any remaining water that departed after the instrument was made and stabilizes the wood.
However: As a flute or fife loses moisture, the wood shrinks, and the finger holes grow larger. As a fretboard dries, the wood also shrinks and the slots for the frets widen, dynamically stressing the adhesive that holds the fret. A vegetable-based oil will never dissolve or weaken common adhesives. As dehydration continues, the fretboard actually narrows, creating the problem commonly known as "fret sprout."
"Darkening" Your Board
A very frequent comment I hear is that "Fret Doctor
darkens
my board nicely!" Over time, with exposure to air, light, humidity, and wear and tear, the board faded. The Fret Doctor
simply restored it to the original color. The main reason for oiling a fretboard isn't to darken it; it is to
preserve
it. Remember that the verb, "
darken
," has created endless confusion on some of the guitar forums, and some quite nasty arguments, for quite a while. Fret Doctor
will bring up the natural color, grain, and patina of a tropical hardwood, making it darker in appearance but not making it black. Ebony will appear blacker because black is the normal color of the wood. Your Rosewood will be far prettier.
Results may vary for many reasons. Even with a brand new guitar, one often has no idea of how the surface was finished by its maker. The same applies with a used instrument. If it had been treated with any of the countless substances that I hear about: waxes, silicones, furniture polishes, mineral oil, "Lemon" oil, or ordinary skin oil and dirt, it may be necessary to remove this gunk prior to treatment with Fret Doctor
.
I am told by many guitarists that
Formby's
does a excellent job. There may be others. You can then allow Fret Doctor
to do its stuff. Formby's won't remove varnishes like Linseed or Tung oil. The Fret Doctor
will merely pool on the surface but will not penetrate at all. You will observe little or no difference. In this case, you need either sanding or a paint stripper. I don't want to go there. Don't ask.
F
or those who wish to truly
blacken
a board, Fret Doctor will not do what you want. You can make a board black with leather dye, wood stains or other means. It will "darken" both the board and maybe your fingers but will do nothing to protect it. It might be still a good idea to preserve the wood with Fret Doctor first. Be sure that you are "blackening" your board for the right reasons. Many old guitars came with Rosewood boards, in natural Rosewood color. They were treated at one time or the other with Linseed oil, which oxidizes over time, and turns black. The originals, in many cases, were not black at all! Only the Ebony.
Think of it as insurance!
Don't concern yourself with "over saturating" the wood.  There isn't that much air space in it. This isn't Balsa wood we are using here.  If it won't take any more, it is full, like a beer mug. Any additional oil will simply wipe off.  I am also told that Fret Doctor
also works well on acoustic bridges and bridge pins. I suggest that you apply it a few times per year, or at string changes.
Please remember that Fret Doctor
is not "just another bore oil." A bottle of most bore oils and fretboard treatments contains about a dime's worth of mineral oil. Fret Doctor is composed of a complex mixture of rare and expensive vegetable-based oils imported from all over the world. That's why it works so well. If money is an issue, go to the drugstore and buy a pint of mineral oil. It will make the board look nice, but will do
nothing
to preserve it.